Street workout set FT0001 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.

Calisthenics
Street workout set FT0002 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0004 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0005 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0006 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0007 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0008 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0009 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0010 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0011 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0012 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0013 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0014 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0015 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0016 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0017 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0018 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0019 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0020 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0021 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0022 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0023 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0024 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0025 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0026 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0027 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0028 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0029 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0029 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.
Street workout set FT0003 - The support structure of the workout set is made of structural steel (metal profile 90 x 90 × 3 mm) which is protected against corrosion by zinc coating, resulting in a very prolonged service life of the workout elements. The colouring process is made by baked paint according to the RAL color system.
These structures are anchored to concrete footings with zinc anchors. All other metallic elements, such as handles, parallel bars etc., are also zinc coated and treated with baked paint. All bench boards and steps are made of high quality HDPE (high-pressure, full-colored polyethylene, which is characterised by high color stability, UV resistance and mainly safety because it is rigid and there is no risk of injury caused by sharp broken fragments). All connecting material is zinc or stainless steel coated.
Each Calisthenics structure can be produced in six colour variants of the support structure - red, blue, yellow, green, grey and orange but handles are black.
An antishock floor is recommended under the structure or a grass surface is enough.